Material
-
Thickness: <1mm
-
Composition: reinforced PVC-acrylic composite
-
Extensiblity: Class III (AS 4654.1)
Roll Sizes
-
Trade roll: 1.3m x 10m in carton
-
Bulk roll: 1.3m x 250m on steel stillage
Compliance
-
AS 4654.1: waterproofing membranes for external
above ground use
-
AS/NZS 4858: wet area membranes
-
ISO 16000-9: indoor air quality; VOCs emissions
≤0.05 mg/m²·h
Substrates
-
Magnum board
-
Cement sheet
-
Yellow tongue sheet
-
Tongue & groove timber
-
Plywood
-
Particleboard
-
Sand & cement screeds
-
Mild & stainless steel
-
Trowelled concrete
-
Existing concrete
-
Concrete blocks
-
Light weight Aerated floor & wall panels
-
PVC precast panels
-
Marble & stone
Similar products
-
Accessories
*NEW* ROOF & FACADE
PDQ Poly is gaining popularity for bricked and ceramic tiled roofs. It offers architectural freedom for shape complexity, multiple angles and irregular geometry roofs. Suited to high-rise, commercial and residential architecture.
-
Unmatched watertightness (fully bounded; no lateral water-migration possible)
-
Ideal for complex roof and façade geometries
-
Self-extinguishing PVC
-
Thermal-break properties
-
Antimicrobial protection
-
Advanced PVC acrylic: Our unique composition ensures lifetime resistance, unlike liquid membranes which are less resistant and prone to thinning, softening and failure over time.
-
Unique Adhesive: Low initial tack for easy application with high flexibility & ultimate strength allow it to adapt to any building movement.
-
Crack Isolation: Effectively isolate tiles from reflective cracking & is perfect for use over any type of damaged, cracked or existing substrate.
-
Uniform Thickness: Consistent thickness and strength unlike liquid membranes.
-
High Tensile Strength: PDQ is the World's strongest waterproofing membrane, with 30 MPA tensile strength! Built to withstand thermal expansion and horizontal movement with ease.
-
Uncoupling Capabilities: Lifetime live adhesion capabilities for future renovations without causes.
-
Warranty: 25 years on the PVC sheet against manufacturing defects & UV degradation under normal exposure conditions* & 10 years for material performance defects under normal service conditions*. See our Resources page for full warranty details.
FEATURES
For flat roofs with PDQ Poly membrane, begin with
CD Structural Plywood:
-
A-Bond (exterior phenolic adhesive)
-
F11 stress grade
-
AS/NZS 2269 compliant













